Wacker Neuson BH 23 Operator's Manual download pdf (Page 24)

Operation BESCHREIBUNG

T00931GB 22

Engaging clutch

Once the engine has warmed up push throttle to full position

(downwards).

Winter operation! Extremely low temperatures require 2-3 minutes

warming up of the engine at idling speed. As a result of the low

temperatures, grease will have stiffened in the system. To overcome

the difficulties arising from this, warm up the engine and lift the

machine several times, then put system into operation by quickly

opening the throttle.

5.3 During operation

Keep breaker dry and clean. Avoid no-load strokes. Never allow the

hammer to run with throttle wide open when forcing away broken or cut

off material or when lifting the hammer. When lifting the hammer, the

engine is decelerated by releasing the gas lever in the handle.

5.4 After operation

5.4.1 Short-term interruptions

Press stop button.

5.4.2 Finishing of breaking work

Close fuel cock. Allow engine to run until fuel in carburettor is used up.

5.4.3 Longer operational pauses

Clean hammer. Add corrosion preventative to fuel mixture and allow

engine to run for 5 minutes. Oil parts susceptible to rust.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

No comments

Wacker Neuson BH 23 Operator's Manual Page 24