Wacker Neuson CRT 48-31V Operator's Manual

0163203en 004 0311 0163203ENOperator’s ManualRide-On TrowelCRT 36-24ACRT 36-25

Safety Information CRT 36-24A/2510 wc_si000377gb.fm1.3 Operating SafetyFamiliarity and proper training are requi

CRT 36-24A/25 Safety Informationwc_si000377gb.fm 111.3.12 Be sure operator is familiar with proper safety precautions andoperation techniques before u

Safety Information CRT 36-24A/2512 wc_si000377gb.fm1.4 Operator Safety while using Internal Combustion EnginesOp

CRT 36-24A/25 Safety Informationwc_si000377gb.fm 13• Do not refuel if the machine is positioned in a truck fitted with a plastic bed liner. Static ele

Safety Information CRT 36-24A/2514 wc_si000377gb.fm1.5.5 Do not test for spark on gasoline-powered engines if th

CRT 36-24A/25 Safety Informationwc_si000377gb.fm 15Notes

Labels CRT 36-24A/2516 wc_si000378gb.fm2Labels2.1 Label Locations CDBJ

CRT 36-24A/25 Labelswc_si000378gb.fm 17wc_gr007015A

Labels CRT 36-24A/2518 wc_si000378gb.fm2.2 Safety LabelsRef. Label MeaningADANGER!Asphyxiation hazard.  Engines

CRT 36-24A/25 Labelswc_si000378gb.fm 19SWARNING! Hot surface!TWARNING!Entanglement hazard. Keep hands away from spinning belt and pulley.--WARNING! Re

Copyright notice© Copyright 2010 by Wacker Neuson Corporation.All rights, including copying and distribution rights, are reserved.This publication may

Labels CRT 36-24A/2520 wc_si000378gb.fm2.3 Informational LabelsRef. Label MeaningCPositions of the key switch:

CRT 36-24A/25 Labelswc_si000378gb.fm 21POperator’s Manual must be stored on machine. Replacement Operator’s Manual can be ordered through your local W

Operation CRT 3622 wc_tx000639gb.fm3 Operation3.1 Features and Controls

CRT 36 Operationwc_tx000639gb.fm 23Control locations and functions: The Ride-On Trowel features a seat with an integrated “operatorpresence” system,

Operation CRT 3624 wc_tx000639gb.fm3.2 Position of the OperatorSafe and efficient use of this machine is the ope

CRT 36 Operationwc_tx000639gb.fm 253.4 Break-in PeriodSee Graphic: wc_gr0012523.4.1 To break in the gearboxes, run the engine at 50% of full throttle

Operation CRT 3626 wc_tx000639gb.fm3.6 StartingBefore starting the operator must know the location and function

CRT 36 Operationwc_tx000639gb.fm 273.8 OperationTo utilize your Wacker Neuson Ride-On Trowel to its fullest capacity,the machine should be driven in t

Operation CRT 3628 wc_tx000639gb.fm3.9 SteeringSee Graphic: wc_gr000146Refer to the illustration for the necess

CRT 36 Operationwc_tx000639gb.fm 293.10 Pitch AdjustmentWhen changing or setting the pitch (angle) of the trowel blades, slow the machine, set the des

CRT 36 Forewordwc_tx001268gb.fm 3ForewordMachines covered by this manualMachine documentation Keep a copy of the Operator’s Manual with the machine a

Maintenance CRT 36-24A/2530 wc_tx000640gb.fm4 Maintenance4.1 Periodic Maintenance ScheduleThe table below lists

CRT 36-24A/25 Maintenancewc_tx000640gb.fm 314.2 Trowel GearboxesSee Graphic: wc_gr003730Check the gearboxes for the correct oil level after every 20 h

Maintenance CRT 36-24A/2532 wc_tx000640gb.fm4.3 LubricationSee Graphic: wc_gr003731, wc_gr003732The drive system

CRT 36-24A/25 Maintenancewc_tx000640gb.fm 334.4 Control Arm Adjustment (Forward or Backward)See Graphic: wc_gr003732The control arms should line up ev

Maintenance CRT 36-24A/2534 wc_tx000640gb.fm4.5 Right-hand Control Arm Adjustment (Right or Left)See Graphic: wc

CRT 36-24A/25 Maintenancewc_tx000640gb.fm 354.7 Transporting TrowelsSee Graphic: wc_gr003733ALWAYS turn the engine off and remove the key from the mac

Maintenance CRT 36-24A/2536 wc_tx000640gb.fm4.8 Drive BeltSee Graphic: wc_gr003734To replace the drive belt:4.8.

CRT 36-24A/25 Maintenancewc_tx000640gb.fm 374.9 Battery Jump Start ProcedureOccasionally, it may be necessary to jump start a weak battery. If jumpsta

Maintenance CRT 36-24A/2538 wc_tx000640gb.fm4.10 Spark PlugClean or replace spark plug as needed to ensure prope

CRT 36-24A/25 Maintenancewc_tx000640gb.fm 394.11 Air CleanerSee Graphic: wc_gr000154, wc_gr003765The engine is equipped with a dual element air cleane

Foreword CRT 364 wc_tx001268gb.fm Approved modifications are those performed by an authorized Wacker Neu-son se

Maintenance CRT 36-24A/2540 wc_tx000640gb.fm4.12 Engine Oil and FilterSee Graphic: wc_gr000155Drain oil while en

CRT 36-24A/25 Maintenancewc_tx000640gb.fm 414.13 Storing the MachineWhenFollow the procedures below if the machine is to be stored for more than 30 da

Maintenance CRT 36-24A/2542 wc_tx000640gb.fm4.14 TroubleshootingProblem Reason RemedyEngine does not start. Engi

CRT 36-24A/25 Maintenancewc_tx000640gb.fm 43Problem Reason RemedyMachine does not move. Drive belt broken. Replace drive belt.Vacuum between bottom of

Schematic CRT 36-24A/2544 wc_tx001324gb.fm5 Schematic

CRT 36-24A/25 Schematicwc_tx001324gb.fm 455.1 Schematic Components Ref. Description Ref. DescriptionA Battery U Spray pump motorB Oil pressure switch

Technical Data CRT 36-24A/2546 wc_td000187gb.fm6 Technical Data6.1 EngineEngine Power RatingNet power rating per

CRT 36-24A/25 Technical Datawc_td000187gb.fm 476.2 TrowelPart No.CRT 36-24A06200800620299CRT 36-2506201150620295TrowelOperating Weightkg (lbs.)0620080

Technical Data CRT 36-24A/2548 wc_td000187gb.fm6.3 Sound and Vibration SpecificationsThe required sound specific

Emission Control Systems Information and Warrantywc_tx001754gb.fm 497 Emission Control Systems Information and WarrantyThe Emission Control Warranty a

CRT 36-24A/25 Table of Contentswc_bo0163203en_004TOC.fm 5Foreword 31 Safety Information 71.1 Signal Words found in this Manual ...

Emission Control Systems Information and Warranty50 wc_tx001754gb.fmTampering and AlteringTampering with or alte

Emission Control Systems Information and Warrantywc_tx001754gb.fm 517.3 Limited Defect Warranty for Wacker Neuson Evaporative Emission Control Systems

Emission Control Systems Information and Warranty52 wc_tx001754gb.fmWhat is not covered Failures other than tho

Emission Control Systems Information and Warrantywc_tx001754gb.fm 53Support Department (1-800-770-0957) or visit wackerneuson.com to find a dealer/ser

William Lahner Robert MotlVice President of Engineering Manager,

Wacker Neuson SE · Preußenstraße 41 · D-80809 München · Tel.: +49-(0)89-3 54 02-0 · Fax: +49 - (0)89-3 54 0

Table of Contents CRT 36-24A/256 wc_bo0163203en_004TOC.fm4.5 Right-hand Control Arm Adjustment (Right or Left) .

CRT 36-24A/25 Safety Informationwc_si000377gb.fm 71 Safety Information1.1 Signal Words Found in this ManualNOTICE: Used without the safety alert symbo

Safety Information CRT 36-24A/258 wc_si000377gb.fm1.2 Machine Description and Intended UseThis machine is a ride

CRT 36-24A/25 Safety Informationwc_si000377gb.fm 9To protect yourself and others, make sure you thoroughly read and understand the safety information