Wacker Neuson GPSi 3200 Operator's Manual download pdf (Page 45)

GPi 3200 / 4300 Maintenance

wc_tx001240gb.fm 45

4.6 Changing the Engine Oil

When

Change the engine oil after the first 20 hours of operation, and every 50 hours

thereafter.

Prerequisites

 Engine is stopped, but still warm

 Machine is on a level surface

 Fresh engine oil (see engine operator’s manual)

 Plastic cloth and a container of sufficient volume to collect drained oil

Note: Collect, store and dispose of drained oil in accordance with current environ-

mental protection regulations.

Changing the

engine oil

Follow the procedure below to change the engine oil

1. Place a plastic cloth and a collection container beneath the machine.

2. Unscrew and remove the oil filler cap (O) from the oil fill port.

3. The oil drain plug (E) is located at the base of the engine. Unscrew and remove

the oil drain plug. Drain the oil into a suitable container.

4. Re-install the oil drain plug.

5. Add new engine oil to the upper line of the level gauge on the oil filler cap. When

the proper oil level is reached, re-install the oil filler cap. See Checking the

Engine Oil.

WARNING

Burn hazard. Engine and exhaust pipe become extremely hot during operation.

f Stop the engine and allow the machine to cool before changing the engine oil.

wc_gr006669

WARNING

Most used oil contains small amounts of materials that can cause cancer and other

health problems if inhaled, ingested, or left in contact with skin for prolonged

periods of time.

f Take steps to avoid inhaling or ingesting used engine oil.

f Wash skin thoroughly after exposure to used engine oil.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 67 68

No comments

Wacker Neuson GPSi 3200 Operator's Manual Page 45