Wacker Neuson GPSi 3200 Operator's Manual download pdf (Page 28)

Operation GPi 3200 / 4300

28 wc_tx001875gb.fm

3.11 Customer Connections

Description

The generator is equipped with:

 (CSA models)—one 120V 20A duplex receptacle (b) with an integral ground

fault circuit interrupt (GFCI), and one 120V 30A twist-lock receptacle (c).

 (CARB models)—one 120V 20A duplex receptacle (b) and one 120V 30A twist-

lock receptacle (c), both protected by a separate ground fault circuit interrupt

(GFCI) (s).

 one pair of DC terminals (e) exclusively intended for charging 12V automotive-

style batteries. See Using DC Power for more information.

The GFCI cuts power to the receptacles when a ground fault occurs to a piece of

equipment attached to the generator.

Testing GFCI

operation

(CSA

machines)

Follow the procedure below to test the GFCI for proper operation every time the

generator is used.

1. Disconnect all equipment from the generator.

2. Start the generator.

3. Push the black TEST button (b1) on the receptacle. Pushing the TEST button in

cuts power to the receptacle and causes the red RESET button (b2) to pop out.

NOTICE: If the RESET button does not pop out, the GFCI is not working. Do not

operate the generator until the problem can be corrected.

4. Push the RESET button to restore power to the receptacle.

RESET

TEST

RESET

TEST

wc_gr008630

b b1 b2

GFCI AC BREAKER

DC BREAKER

DC12V-8.3A

b c

s1 s2 s

CSA CSA

CARB

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

No comments

Wacker Neuson GPSi 3200 Operator's Manual Page 28