Wacker Neuson GPi 1700 Operator's Manual download pdf (Page 29)

GPi 1700 Operation

wc_tx001234gb.fm 29

2.14 Using AC Power

Prerequisites

 Verify that the engine is operating.

 Verify that pilot indicator light (p) is illuminated.

 Turn off the equipment to be connected to the generator.

 Confirm that the equipment to be connected to the generator does not exceed

the maximum rated power output and specifed amperage.

Engine switch

position

Leave the engine switch (y) in the RUN position while the machine is operating.

Connecting

equipment

1. Insert the equipment plug into the 120V AC GFI receptacle (u).

2. Turn on the power switch for the equipment.

Disconnecting

equipment

3. Turn off the power switch for the equipment.

4. Remove the plug from the 120V AC GFI receptacle.

WARNING

Electric shock hazard. Failure to properly ground the generator could lead to

electrical sparks, especially if the connected electrical equipment is grounded.

f Make sure the generator is properly grounded. See Grounding the Generator.

wc_gr006657

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 53 54

No comments

Wacker Neuson GPi 1700 Operator's Manual Page 29