Wacker Neuson GPi 1700 Operator's Manual download pdf (Page 38)

Maintenance GPi 1700

38 wc_tx001235gb.fm

3.6 Cleaning the Fuel Filter

When

Clean the fuel filter monthly, or after every 200 hours of operation.

Prerequisite

Engine is stopped and cool to the touch

Description

The fuel filter (g2) is located beneath the fuel tank cap (g1). The fuel filter screen

removes sediment and other impurities from fuel added to the tank.

Procedure

Follow the procedure below to clean the fuel filter.

1. Lift the fuel tank cap cover (g). Unscrew and remove the fuel tank cap.

2. Remove the fuel filter from the fuel filling port (g3).

3. Using fresh, clean water, rinse the fuel filter thoroughly. If necessary, use a clean

cloth or compressed air to remove residual sediment from the inside of the fuel

filter.

NOTICE: Handle the fuel filter carefully to avoid damaging the screen. If the fuel

filter screen is torn or punctured, replace it.

4. Thoroughly dry the fuel filter, making sure that all water has been removed.

5. Re-insert the fuel filter into the fuel filling port.

6. Re-install the fuel tank cap, and close the fuel tank cap cover.

wc_gr006744

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

No comments

Wacker Neuson GPi 1700 Operator's Manual Page 38