Wacker Neuson GPi 1700 Operator's Manual download pdf (Page 36)

Maintenance GPi 1700

36 wc_tx001235gb.fm

3.4 Changing the Engine Oil

When

Change the engine oil after the first 20 hours of operation, and every 50 hours

thereafter.

Prerequisites

 Engine is stopped, but still warm

 Machine is on a level surface

 Fresh engine oil (see engine operator’s manual)

 Plastic cloth and a container of sufficient volume to collect drained oil

Note: Collect, store and dispose of drained oil in accordance with current

environmental protection regulations.

Changing the

engine oil

Follow the procedure below to change the engine oil

1. Place a plastic cloth and a collection container beneath the machine.

2. Using a flat screwdriver or a coin, unscrew and remove the right side cover (j)

from the generator enclosure.

3. Unscrew and remove the oil filler cap (k) with level gauge from the oil fill port.

4. The oil drain plug (k3) is located on the underside of the machine. Remove the

oil drain plug. Drain the oil into a suitable container.

5. Re-install the oil drain plug.

6. Add new engine oil to the upper line of the level gauge. When the proper oil

level is reached, re-install the oil filler cap. See Checking the Engine Oil.

7. Re-install the right side cover.

WARNING

Burn hazard. Engine and exhaust pipe become extremely hot during operation.

f Stop the engine and allow the machine to cool before changing the engine oil.

wc_gr006743

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

No comments

Wacker Neuson GPi 1700 Operator's Manual Page 36