Wacker Neuson GPi 1700 Operator's Manual download pdf (Page 32)

Maintenance GPi 1700

32 wc_tx001235gb.fm

3 Maintenance

3.1 Periodic Maintenance Schedule

The table below lists basic machine and engine maintenance. Tasks designated

with check marks may be performed by the operator. Tasks designated with square

bullet points require special training and equipment.

Refer to the engine owner’s manual for additional information.

1 Perform initial oil change after first 20 hours of operation.

2 Refer to the engine service manual or consult an authorized Wacker Neuson service center

3 Replace yearly

Checking the Engine Oil

Every

8 hours

(daily)

Every

50 hours

(weekly)

Every

100 hours

(biweekly)

Every

200 hours

(monthly)

Every

500 hours

Every 1000

hours

Clean generator enclosure

Check for loose or missing fasteners

Check engine oil level and refill as needed

Check AC receptacles for dirt or blockage;

test GFI

Check DC terminals for damage or dirt

Check engine switch for proper operation

Clean spark plug

Clean air cleaner

Change engine oil



Clean spark arrester



Replace air cleaner insert



Clean fuel filter

Clean and adjust spark plug and electrodes

Replace spark plug



Remove carbon from cylinder head



Check and adjust valve clearance



Check and adjust carburetor



Replace fuel lines



Overhaul engine



Check generator rotor



Check generator stator



Replace engine mount



1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

Comments to this Manuals

No comments

Wacker Neuson GPi 1700 Operator's Manual Page 32

Comments to this Manuals

Related products and manuals for Power generators Wacker Neuson GPi 1700