Wacker Neuson GPi 1700 Operator's Manual download pdf (Page 21)

GPi 1700 Operation

wc_tx001234gb.fm 21

2.7 Use of Extension Cords

When a long extension cord is used to connect an appliance or tool to the

generator, a voltage loss occurs—the longer the cord, the greater the voltage loss.

This results in less voltage being supplied to the appliance or tool and increases

the amount of current draw or reduces performance. A heavier cord with a larger

wire size will reduce the voltage loss.

Use the chart below as a guide for selecting proper cable size.

Use only extension cords rated for outdoor use and equipped with a third-wire

ground.

NOTICE: Operating equipment at low voltage can cause it to overheat.

WARNING

Electric shock hazard. Damaged extension cords can cause electrical shock,

resulting in serious injury or death. DO NOT use worn, bare, or frayed cords.

f Replace damaged cords immediately.

Current Load in Watts Maximum Cable Length in Feet

(Amps) 120V 240V #10 #12 #14 #16

2.5 300 600 1000. 600 375 250

5 600 1200 500 300 200 125

7.5 900 1800 350 200 125 100

10 1200 2400 250 150 100 -

15 1800 3600 150 100 65 -

20 2400 4800 125 75 50 -

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 53 54

No comments

Wacker Neuson GPi 1700 Operator's Manual Page 21