Wacker Neuson GPi 1700 Operator's Manual download pdf (Page 24)

Operation GPi 1700

24 wc_tx001234gb.fm

2.9 Customer Connections

Description

The generator is equipped with :

 one 120V duplex receptacle (u) with a ground fault circuit interrupt (GFI)

 one pair of DC terminals (v) exclusively intended for charging 12V automotive-

style batteries. See Using DC Power for more information.

Testing GFI

operation

The GFI cuts power to the receptacle when a ground fault occurs to a piece of

equipment attached to the generator. Follow the procedure below to test the GFI

for proper operation every time the generator is used.

1. Disconnect all equipment from the generator.

2. Start the generator.

3. Push the blue TEST button (u1) on the receptacle. Pushing the TEST button in

cuts power to the receptacle and causes the red RESET button (u2) to pop out.

NOTICE: If the RESET button does not pop out, the GFI is not working. Do not

operate the generator until the problem can be corrected.

4. Push the RESET button to restore power to the receptacle.

If the RESET button pops out during operation, stop the generator and check the

equipment attached to the generator for defects.

wc_gr006739

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 53 54

No comments

Wacker Neuson GPi 1700 Operator's Manual Page 24