Wacker Neuson GPi 1700 Operator's Manual download pdf (Page 40)

Maintenance GPi 1700

40 wc_tx001235gb.fm

3. Re-install the fuel tank cap, and close the fuel tank cap cover.

Draining the

carburetor

4. Place a plastic cloth and a collection container beneath the machine.

5. Using a flat screwdriver or a coin, unscrew and remove the left side cover (c)

from the generator enclosure.

6. Locate and remove the fuel drain screw (e). Fuel will drain from the attached

plastic tube.

7. Collect and dispose of drained fuel.

8. Re-install the fuel drain screw.

9. Re-install the left side cover.

Change the

engine oil

See Changing the Engine Oil.

Check

fasteners

Check the machine for loose or missing fasteners. Tighten or replace as needed.

Clean

generator

body

10.Using a clean, dry shop cloth, wipe the outside of the machine thoroughly to

remove dust and contaminants.

11.Spray the machine with a protectant such as Armor-All®.

NOTICE: Do not use water to clean the machine! Water is corrosive and can

permanently damage the machine and operating electronics.

Store the

generator

12.Pull the starter handle until resistance is felt. Leave the handle in this position.

13.Store the generator in a well-ventilated, low humidity area.

wc_gr006661

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

No comments

Wacker Neuson GPi 1700 Operator's Manual Page 40